Three exclusions we find in online policies

Many scanning firms start with a policy bought online in a few minutes. That can be the right call. But when scanning firms send us those policies, three things come up again and again. Here is what they are, and how to check your own.

First, fairly

Online is not the problem

An online policy is fast, cheap and often good at what it was built for: a small business with an office, visitors and a laptop. Plenty of new scanning firms buy one for their first job, and for some work it fits. The trouble starts when the work grows. A point cloud becomes a Revit model an architect designs from. An existing conditions scan becomes the basis for a contractor’s prefab. A client sends a contract asking for professional limits.

Scanning is also an awkward fit for most insurers’ classes. GeoWeek reported that land surveying was the nearest professional class insurers had for laser scanning work.[9] A quick online form has to drop you into some class, and what it picks shapes which exclusions come with the policy. What follows is what we find in policies scanning firms send us, with the standard forms behind it where there is one.

What we find

The three

01

No professional liability at all

The policy is general liability, or a BOP that bundles general liability with office property. There is no professional liability part anywhere in it.

Why it matters: General liability is built for bodily injury and property damage, not financial harm from professional services.[1] The standard ISO businessowners form goes further and lists design services among the professional services its liability section excludes.[2]A wrong as-built that costs a client a redesign has nowhere to land.

02

A drafting, design or CAD services exclusion

An endorsement that names services the policy will not cover. On a scanning firm’s policy we sometimes find the list includes drafting, design, CAD or modeling, which reads straight onto scan-to-CAD and scan-to-BIM work.

Why it matters: ISO has forms built for this. CG 21 16 is a designated professional services exclusion, where the underwriter writes in the services excluded.[7] CG 22 43 excludes professional services of engineers, architects or surveyors performed by or for the named insured.[4][3] Insurers also write their own versions, so the name on the form tells you less than the schedule inside it.

03

A construction or contracting services exclusion

Wording that removes claims arising out of construction, contracting, installation or work performed on a construction site. It turns up on professional liability policies as well as general liability.

Why it matters: Scanning firms work on live job sites, often hired by the contractor, and some do layout, verification or machine-control models. On the general liability side, ISO’s CG 22 79 was developed for contractors and excludes professional services with an exception for construction means and methods; IRMI warns that its exceptions narrow the exclusion and do not create professional coverage.[5][6] On the professional side, many design professional policies exclude the “build” part of design-build work.[8]

How they combine

The firm that thinks it is covered twice

A pattern we see often is a firm with a general liability policy carrying a professional services exclusion, and a separate professional liability policy carrying a drafting or construction exclusion. Each looks reasonable on its own. Together they can leave the firm’s core work, capturing a site and modeling it in Revit, covered by neither. Whether that is true for a particular firm depends on the exact wording of both policies and on the facts of a claim.

What to ask for instead

  • A professional liability policy whose definition of professional services names laser scanning, reality capture, scan-to-BIM and as-built documentation, in words close to your own.
  • No exclusion for drafting, design, CAD or modeling, or, if one cannot be removed, written confirmation of what it does and does not reach.
  • Any construction-related exclusion narrowed so it does not take out field capture, verification scans or models a contractor builds from.
  • A general liability policy whose professional services exclusion lines up with the professional policy, so the two meet rather than leave a gap between them.

Our practical view: the definitions matter more than the labels, so read the wording, not the title of the form. If the scan touches boundary, topography or control, also read do you need a surveyor’s license to scan?, since an exclusion for surveying is a fourth one worth looking for.

Twenty minutes, one coffee

How to read your own policy

  1. The declarations page. Who is insured, the policy period, the limits, and on a claims-made policy the retroactive date. Check that the description of your business sounds like you. A scanning firm described as a surveyor, a consultant or a manufacturer may be rated, and read, as one.
  2. The schedule of forms. Usually right after the declarations, it lists every form and endorsement that makes up the policy, by number and edition date. Match each entry to a form in the packet; a form on the schedule but missing from the packet, or the other way round, is a question for the insurer.
  3. The coverage form. The base form: what is covered, the definitions, the exclusions. On professional liability, find the definition of “professional services”. If it is written around your services, good. If it reads like a generic consultant, ask how scanning fits.
  4. Every endorsement. Read each one. The exclusions that matter to a scanning firm are almost always here, not in the base form. Look for the words professional, design, drafting, CAD, surveying, construction, contracting and data.

The schedule of forms is the step most people skip, and it is the one that tells you whether you are holding the whole policy. Edition dates matter too, because coverage can change between editions of the same form.[10] If your online insurer only sent a declarations page and a certificate, ask for the full policy with every endorsement.

For your firm

Want a second pair of eyes?

Send us the full policy, every page. We will tell you in plain words whether it covers the scanning and modeling you actually deliver.

Common questions

Online policies, in plain words

Is an online policy a bad choice?

No. For a new firm doing small jobs with no contract requirements, an online general liability or BOP policy can be a sensible start. The question is whether it covers the work you deliver and what your contracts ask for. That depends on the policy wording, not the way it was bought.

My policy says “professional liability” on the declarations. Am I fine?

Not necessarily. Check what it defines as professional services and whether an endorsement removes the work you do. We have seen policies with a professional liability part whose exclusions took out drafting or construction-related work.

Can these exclusions be removed?

Sometimes, by the same insurer, and sometimes only by moving to a policy written for design and technical firms. It depends on the insurer and on how your work is described in the application.

Which insurers do this?

We do not name insurers here. Wording changes by state, by product and by year, and the right answer is in your policy, not in a list.

Keep reading

Sources

  1. Open Exam Prep, “Commercial General Liability (CGL)” (an insurance licensing study guide)
  2. InsuranceXDate, ISO Businessowners Coverage Form BP 00 03 summary (an insurance forms reference)
  3. IRMI, “The CGL and the Professional Liability Exclusion” (expert commentary)
  4. InsuranceXDate, CG 22 43 Exclusion, Engineers, Architects or Surveyors Professional Liability (an insurance forms reference)
  5. InsuranceXDate, CG 22 79 Exclusion, Contractors, Professional Liability (an insurance forms reference)
  6. IRMI, “Contractors Professional Liability and the CGL” (expert commentary)
  7. FC&S Legal (PropertyCasualty360), “Exclusions Endorsements, Series CG 21 00” (a coverage reference)
  8. IRMI, “Insurance for Architect and Engineer Led Design-Build Projects” (expert commentary)
  9. GeoWeek News, “Assessing Liability and Insuring for Risk in Laser Scanning (Part 1 of 2)” (trade publication, 2007)
  10. Insurance Coverage Massachusetts, “Reading an Insurance Policy: Schedule of Forms” (a coverage blog, 2008)

General information only, not legal advice, current as of November 2026. ISO form descriptions are summaries from the sources listed; insurers use their own forms and wording, which change by state and by year. Whether a claim is covered depends on the policy wording and the facts.

Talk to a specialist

Tell Us About Your Firm. We’ll Tell You What We See.

Starting out or renewing, with a policy in hand or not. If something is worth discussing, we’ll call. If not, we’ll say so.