The certificate your client needs by tomorrow
The scan is booked, the GC’s office just emailed, and they need a certificate before you can set up on site. Here is what the request actually means, line by line, and what to send us so it goes out right the first time.
A contractor’s checklist, sent to a scanning firm
In the certificate requests we handle for scanning firms, the requirements usually mirror whatever the general contractor or the engineering prime was asked for, and they were written for trades. So a two person firm with no vehicles, carrying a BLK360 into a school renovation, gets asked for additional insured status, a waiver of subrogation, primary and non-contributory wording, hired and non-owned auto and an umbrella. Most of it is normal and fixable. The trick is knowing which items a certificate can show and which need the policy itself to change.
Start with one rule. The ACORD 25 certificate states that it does not affirmatively or negatively amend, extend or alter the coverage of the policies listed on it.[5] A certificate is a summary. Every item below lives in the policy or an endorsement, or it does not exist.
Additional insured, waiver, primary, notice
Additional insured, CG 20 10 and CG 20 37
Your client is added to your general liability policy for claims arising out of your work. CG 20 10 covers them while your work is ongoing; CG 20 37 covers them after it is completed.[2] Since the 2001 revision, CG 20 10 reaches ongoing operations only, so a contract that wants both needs both.[1] If the request names an edition, such as 07 04, check that your endorsement matches.
Waiver of subrogation
After your insurer pays a claim, it can normally try to recover from whoever caused it. A waiver gives up that right against the party named, usually your client. IRMI is clear that a waiver only stops the insurer stepping into your shoes; it does not do what primary and non-contributory wording does.[3] Requests often want it on general liability, auto, umbrella and workers’ compensation, and each one is a separate endorsement or wording.
Primary and non-contributory
Your policy pays first for a claim against the additional insured, and does not ask the client’s own insurance to share the loss. It sets the order of payment while a claim is open, which is why contracts that ask for it usually also ask for the waiver.[3]
30-day notice of cancellation
The current ACORD 25 removed the old notice of cancellation wording, and IIABA notes that notice of cancellation is a policy right that a certificate cannot create.[4] If the client wants notice, it has to come from an endorsement on the policy, and not every insurer offers one. Typing it into the description box does not make it so.
Whether your additional insured endorsement names the client or applies to anyone you agree in writing to add matters a great deal on a busy week. See scheduled vs blanket additional insured.
Six more lines, in plain words
Professional limits and the retro date
Professional liability goes on the certificate as its own line, usually per claim and aggregate. Because it is claims-made, many contracts ask for the retroactive date to be shown and to be earlier than the start of your services. The retroactive date sets how far back covered work can go, and keeping it unchanged at renewal matters.[6] Some contracts also want coverage kept in force for years after the work ends.
Hired and non-owned auto
Even a firm with no company vehicles gets asked for auto liability. Hired and non-owned auto covers your firm’s liability when you or staff drive rented or personal cars for work, and an insurer’s own rule of thumb is: no company cars, buy hired and non-owned.[7] It does not pay for damage to the employee’s own car.[7]
Umbrella, follow form
An umbrella or excess policy adds limits above your general liability, auto and employer’s liability. “Follow form” means it follows the underlying policy’s terms.[8] Some requests want the certificate to say so, and some want the additional insured and waiver to carry up to the umbrella as well.
AM Best rating
“A- VIII” is two things: A- is AM Best’s financial strength rating of the insurer, and VIII is its financial size category, based on policyholder surplus.[9] A carrier can meet the letter and miss the size. Check both against the contract.
Railroad, CG 24 17
On utility and pipeline work near tracks, you may see CG 24 17. The standard CGL’s definition of an insured contract leaves out certain indemnity agreements for construction or demolition work within 50 feet of a railroad, and CG 24 17 replaces that definition for a scheduled railroad and job site. It is not a substitute for railroad protective liability, a separate policy railroads often also require.[10]
Vendor portals and endorsement copies
Compliance portals increasingly refuse a certificate that only ticks the additional insured box, and ask for the endorsement page itself.[11] Public owners do too: Kentucky’s procurement FAQ requires a copy of the additional insured endorsement with the certificate.[12] Keep a current set of your endorsements ready to upload.
Three gaps we see on scanning firms’ certificates
No professional liability line at all. The contract asks for professional limits, and the firm’s only policy is a general liability or BOP bought online. No certificate can fix that. See do you need E&O if you don’t design?
The endorsement is not on the policy. Online and package policies often carry a blanket additional insured endorsement but no waiver on workers’ compensation, or no completed operations wording. The certificate request is how the firm finds out, usually the day before the job.
The retro date surprise. A firm that switched insurers and accepted a new retroactive date cannot show a retro date earlier than its services began on an older project. Keep it unchanged when you move; the retroactive date decides how far back covered work can go.[6]
Send us the request
Forward the email, and include these five things. With them we can check the request against your policies and tell you the same day what can go out and what needs an endorsement.
- The insurance section of the contract or the vendor portal’s requirement page, not just the email asking for a COI.
- The exact legal name and address of the certificate holder, and every entity to be named as additional insured.
- The project name and address, and your start date.
- Whether they want endorsement copies uploaded to a portal, and the portal link.
- Your deadline, honestly. If the crew is on site tomorrow, say so.
Better still, send the contract before you sign it. Our practical view: a requirement you cannot meet is easier to negotiate in the proposal than on the morning of the scan. More on how we handle certificates on our certificates page.
Got a certificate request open right now?
Send it to us with the contract. We will tell you what your policy already supports and what has to change before the job.
Certificates, in plain words
Can you just add them as additional insured on the certificate?
A certificate only reports what the policy says. The additional insured status comes from an endorsement on the policy, often a blanket one that applies when a written contract requires it. If your policy has that, we can issue the certificate quickly. If it does not, the policy needs to change first.
Why can’t my professional liability show additional insured?
Professional liability is usually not where additional insured status goes, and in the requests we handle, contracts commonly ask for additional insured status on all lines except professional liability and workers’ compensation. If a request asks for it on professional liability, send it to us and we will help you answer.
The request says “waiver on workers’ comp.” Do I have that?
Only if your workers’ compensation policy carries a waiver endorsement, and whether one is available depends on the insurer and the state. It is one of the most common gaps we see on certificate requests. Ask before you sign.
How fast can a certificate be issued?
When the policy already carries the endorsements the contract asks for, a certificate is paperwork and can usually be turned around quickly. When it needs a new endorsement, the insurer has to issue it, and that takes longer. That is why it pays to send us the contract before the job, not the night before.
Keep reading
- Insurance for BIM and 3D laser scanning firms
- Certificates of insurance at Hardcover
- Scheduled vs blanket additional insured
- Do you need E&O if you don’t design?
- Insurance for drone LiDAR and photogrammetry
- Scan-to-BIM contract clauses
Sources
- Insurance Journal, “Additional Insured Endorsements in Construction” (2015)
- Total CSR, “CG 20 37: Additional Insured for Completed Operations” (an insurance agency training company)
- IRMI, “Primary and Noncontributory” (expert commentary)
- Independent Insurance Agents & Brokers of America (IIABA), “Certificates and Cancellation”
- Miller Nash, “Why You Need More Than Just a Certificate of Insurance” (a law firm)
- ProAssurance, “Covering Nose to Tail” (an insurer)
- Progressive Commercial, “What is hired and non-owned auto insurance?” (an insurer)
- IRMI, “Follow form” (insurance glossary)
- Berxi, “Guide to Understanding the Ratings Given to Insurance Companies” (an insurance agency)
- AssuredPartners, “Bridging the Railroad Gap in Insurance” (an insurance broker)
- Billy, “Vendor compliance guide” (a certificate compliance software vendor)
- Commonwealth of Kentucky, Finance Cabinet, eProcurement Insurance FAQ
General information only, not legal advice, current as of November 2026. Form numbers and editions are ISO’s; insurers use their own versions and wording. What a certificate can show depends on your actual policies and endorsements, and some state rules differ.
Tell Us About Your Firm. We’ll Tell You What We See.
Starting out or renewing, with a policy in hand or not. If something is worth discussing, we’ll call. If not, we’ll say so.