Do you need E&O if you don’t design?
You go out to existing buildings, set up the BLK360 or the RTC360, register the scans and hand off point clouds, Revit models and CAD as-builts. You don’t design, you don’t stamp, and you don’t build. Here is why claims still find scanning firms, and what answers them.
Other people build off your data
It is one of the questions we hear most often from scanning firms that are starting out: “We only capture existing conditions and hand off the data, do we even need professional liability?” The honest answer is that not designing does not mean nobody relies on you. An architect designs the renovation to your model. A mechanical contractor routes new duct through the space your cloud says is clear. A fabricator cuts steel to your tie-in points. When your numbers are wrong, their loss is real, and they will look for whoever supplied the numbers.
This is not new. GeoWeek reported years ago that some scanning providers skipped professional liability because they only supplied existing conditions and were “not design-responsible,” and that this argument may not hold up once a suit is filed.[1] The same reporting noted that general liability was easier for scanning firms to buy than professional liability, and that land surveying was the nearest class insurers had for the work.[1] Both points still match what we see when scanning firms send us their policies.
How a scanning claim usually starts
Something was fabricated off your model
A steel connection, a pipe spool or a prefabricated MEP rack is built to your numbers and does not fit. The fix is rework, field labor and delay, and the first question is whose dimension was wrong. GeoWeek reported a case where a $10 million assembly was built on scan data the designers assumed was correct.[1]
The as-built was wrong
A wall in the wrong place in the Revit model, a ceiling height read off a noisy patch of the cloud, a column grid that drifted in registration. The architect designs to it, and the error shows up in construction, when it costs most to fix.
You missed an area
Scanner shadows above a duct bank, a locked room, a plenum nobody could reach. If the deliverable does not say clearly what was not captured, the client may assume it was, and the conflict is found in the field.
The GC back-charges you
Many scanning firms are hired by the contractor, not the designer. When rework follows, a contractor may withhold payment or send a back-charge rather than file a lawsuit. It is still a demand for money over your professional work.
In the disputes that reach us, the scanning firm is rarely the first target. A design argument between an owner and an architect, or a schedule fight between an owner and a contractor, rolls downhill until someone asks where the existing conditions came from. A clear accuracy statement helps a great deal here; see accuracy statements that protect a scanning firm.
Why general liability usually does not answer
Most small scanning firms we talk to carry a general liability policy or a BOP bought online. That policy is built to answer bodily injury and property damage. Study material for insurance licensing puts it plainly: the CGL covers bodily injury and property damage, not financial harm from a professional’s negligent advice or services, and professional liability insurance fills that gap.[2]
Two definitions do most of the work. “Property damage” in a CGL means physical injury to tangible property, or loss of use of tangible property, and pure economic loss is outside it.[3] And the coverage is triggered by an “occurrence,” which the standard form defines as an accident.[2][3] A wrong as-built that leads to redesign, rework and delay is mostly money, not broken property, and it came from your work product rather than an accident on site. How a court reads loss of use and faulty work varies by state and by the facts, so this is the usual result, not a rule.
Then there are the exclusions. Many general liability policies for technical firms carry a professional services exclusion by endorsement; IRMI describes how broadly these can reach.[4] The standard ISO businessowners form lists design services among the professional services its liability section excludes.[5] So even where a wrong deliverable does damage property, the policy may still say no. We walk through what we find in online policies in three exclusions we find in online policies.
Can a contractor even sue you?
Sometimes. Many states apply an “economic loss rule” that limits negligence claims for purely financial loss between parties without a contract. The Texas Supreme Court used it to bar a contractor’s negligent misrepresentation claim against an owner’s architect over flawed documents.[6] Other courts allow such claims where the relationship is close to a contract, for example where the design professional directs the contractor’s work.[7] Our practical view: do not plan around winning that argument. Defending it is the expensive part.
What professional liability is for
Professional liability, also called errors and omissions, responds to claims that your professional services caused someone a financial loss: the gap the CGL leaves.[2] For a scanning firm, the work it needs to name is the work you actually do: laser scanning, registration, point cloud processing, scan-to-BIM and scan-to-CAD modeling, as-built documentation, and drone LiDAR or photogrammetry if you fly. Whether a given claim is covered depends on the policy wording and the facts.
Most professional liability policies are claims-made. They respond to claims made while the policy is in force, for work done after the retroactive date.[9] Keep the retroactive date unchanged when you renew or switch insurers. If it moves forward, work you did earlier can lose coverage.[9]
Contracts that require it
If you work for architects, the AIA’s standard architect to consultant agreement, C401, requires the consultant to carry general liability, auto, workers’ compensation with employer’s liability, and professional liability, with limits that match or exceed what the architect agreed to carry for the owner.[8] Engineering primes, public agencies and owners commonly ask for the same.
In the contracts and certificate requests we handle for scanning firms, $1 million per claim is the most common professional liability ask, with higher limits on larger public and engineering work. Some also want proof that the coverage stays in place for years after the job ends. The certificate guide covers how that shows up on a COI.
What it takes to find out the cost
We do not publish prices, because they depend on your firm. Insurers quoting architects and engineers professional liability ask for a completed application, typically with your services, revenue, project and contract details, and claims history.[10] GeoWeek reported that offshore and in-plant work can change pricing a great deal, so describe it accurately.[1] In practice, have these ready:
- A one paragraph description of what you capture and deliver, in your own words.
- Revenue for last year and this year, and roughly how it splits between scanning, modeling, drone work and anything else.
- Two or three typical contracts, or the insurance section of each.
- Your current policies, including the declarations and the endorsement list.
- Any claim, demand or back-charge in the last five years, even if nothing was paid.
Six questions to answer before the next contract
- Does any policy we hold name laser scanning, reality capture, scan-to-BIM or as-built documentation as a covered professional service?
- Is the professional liability policy claims-made, and what is the retroactive date?
- Does our general liability or BOP carry a professional services exclusion, and how is it worded?
- Is there an exclusion for drafting, design or CAD services, or for anything a carrier would call surveying?
- Does the policy respond to a claim from a contractor who is not our direct client, such as a fabricator?
- What limits do our current contracts ask for, and do our policies meet them?
If the scan supports anything that looks like boundary, topography or control, read do you need a surveyor’s license to scan? as well, because a policy written for “not surveying” may read that work differently.
Not sure your policy covers scanning?
Send us what you have. We will tell you whether it names the work you actually deliver, and what it would take to close the gap.
E&O for scanning firms, in plain words
We only capture existing conditions. Isn’t E&O for designers?
Professional liability is for claims that your professional work was done wrong, and capturing and modeling existing conditions is professional work that others rely on. Some scanning providers have skipped it on the theory that they are not design-responsible, and GeoWeek’s reporting questioned whether that argument holds up in a suit.
Won’t my general liability policy cover a mistake in the model?
Usually not on its own. General liability is built around bodily injury and damage to tangible property. A loss that is only rework, delay or extra cost is a financial loss, and many general liability and BOP forms also exclude professional services. The answer depends on the policy wording and the facts.
Our contracts don’t ask for professional liability. Do we still need it?
That is a business decision. The contract requirement is one reason to buy it, not the only one: a claim can come from a party you have no contract with, and the cost of defending one can be large even when you did nothing wrong.
How much does it cost?
It depends on your revenue, the work you do, your contracts, your claims history and the limits you need, which is why insurers ask for those on the application. Send us the details and we will tell you what the market looks like for your firm.
Keep reading
- Insurance for BIM and 3D laser scanning firms
- Three exclusions we find in online policies
- The certificate your client needs by tomorrow
- Accuracy statements that protect a scanning firm
- Scan-to-BIM contract clauses
- Insurance for drone LiDAR and photogrammetry
Sources
- GeoWeek News, “Assessing Liability and Insuring for Risk in Laser Scanning (Part 1 of 2)” (trade publication, 2007)
- Open Exam Prep, “Commercial General Liability (CGL)” (an insurance licensing study guide)
- Open Exam Prep, “Bodily Injury, Property Damage, and Personal/Advertising Injury” (an insurance licensing study guide)
- IRMI, “The CGL and the Professional Liability Exclusion” (expert commentary)
- InsuranceXDate, ISO Businessowners Coverage Form BP 00 03 summary (an insurance forms reference)
- Mondaq, “Texas Supreme Court Applies Economic Loss Rule to Limit Tort Claims by Contractors Against Owners’ Design Professionals” (a Jones Day article, a law firm)
- Arizona Attorney (State Bar of Arizona), article on contractor claims against design professionals
- Open Exam Prep, “AIA C401: Flow-Through, Consultant Standard of Care, Insurance & Payment” (an ARE study guide)
- Open Exam Prep, “Occurrence vs. Claims-Made Triggers” (an insurance licensing study guide)
- Professional Underwriters Agency, “What information is needed to quote Architects and Engineers Professional Liability?” (a wholesale insurance broker)
General information only, not legal advice, current as of November 2026. The GeoWeek reporting is from 2007 and the market has changed since. Whether a claim is covered depends on the policy wording and the facts, and liability rules differ by state; ask your attorney about a specific dispute.
Tell Us About Your Firm. We’ll Tell You What We See.
Starting out or renewing, with a policy in hand or not. If something is worth discussing, we’ll call. If not, we’ll say so.