Covering a scanner and drone fleet

Whether it is a BLK360, an RTC360, a NavVis VLX or a bigger unit you rent for one job, a laser scanner can cost as much as a vehicle, and it spends its working life in trucks, airports and job sites. The policy that covers your office often does not follow it there. Here is how to close the gaps.

The starting point

Why the office policy is not enough

One U.S. reseller lists a Leica RTC360 scanner kit at a list price of about $91,000.[1] Most scanning firms own several instruments, plus total stations, GNSS receivers, laptops and drones. That is a fleet, and it rarely sits in the office.

Property and business owners policies are built around your premises. Coverage for property away from the premises is often limited. Under the standard ISO business personal property form, for example, off-premises coverage is limited to $10,000, according to one public adjusting firm.[2] BOP forms vary, so read yours. The usual fix is inland marine: insurers offer contractors equipment and similar floaters that cover equipment wherever it goes.[3][7]

Four common losses

Where scanner claims actually come from

01

Stolen from the truck

The scanner case sits in a vehicle during lunch. Many equipment policies cover theft from a vehicle only if it was locked and shows signs of forced entry, and some add sublimits or security conditions.[5] Your auto policy covers the vehicle, not loose equipment inside it.[6]

02

Lost in shipping

A scanner shipped to a job or back for service. FedEx’s liability is capped at $100 per package unless a higher value is declared, and that cap is a contract limit, not insurance, according to one shipping software vendor’s summary.[8]

03

Dropped on site

A tripod tips over on uneven ground. This is physical damage from an outside cause, which equipment floaters are generally written to cover. Check the deductible against the repair bill.[7]

04

It simply stops working

An internal fault with no outside cause. Equipment floaters typically exclude mechanical breakdown and wear, so this is the loss most firms are surprised by.[7]

How the policy is built

Scheduled vs blanket

A scheduled floater lists each item with its value. A blanket limit covers a pool of smaller items under one total, often with a cap per item. Many firms use both: the costly instruments scheduled, the smaller gear under the blanket.[4]

The trap is the per-item cap. If a scanner sits under a blanket limit with a low cap, a total loss pays only the cap. Our practical view: schedule every scanner, total station and drone by serial number, and update the schedule the week you buy or sell one. Some insurers call this coverage an electronic equipment floater rather than contractors equipment. The name matters less than the wording.

Replacement cost or actual cash value

Actual cash value pays what the item was worth at the time of loss, after depreciation. Replacement cost pays to replace it with new, without that deduction.[10] For instruments that lose value quickly but cost the same to replace, the difference can be large. Ask which basis applies to each line on your schedule.

On the move

Transit, travel abroad and rentals

Shipping. A carrier’s default liability is small and is not insurance.[8] Confirm your floater covers the equipment while a courier has it, and declare value where your policy requires it.

International jobs. Commercial floaters usually cover a set territory, commonly the U.S., its territories and Canada.[7] Before a scan abroad, ask your insurer to extend the territory for the trip, in writing. Customs paperwork is a separate question from insurance.

Rented and borrowed scanners. Rental companies often require the renter to prove coverage for rented equipment as well as general liability. One equipment dealer asks for both, with a $1 million general liability minimum.[9] Ask whether your floater covers rented and borrowed items, up to what value, and for how many days.

Renting and leasing

Renting a scanner for the job, and leasing new kit

Many firms own a BLK360 or an RTC360 and rent a bigger unit for a particular job. The rental house’s request usually arrives the day before pickup, and it tends to ask for two things: proof that the scanner is insured for its full replacement value, and to be named as loss payee, so a claim for their scanner is paid to them. One rental company’s requirements, for example, ask for coverage greater than the replacement value of the equipment, with the rental company listed as loss payee.[13]

That is property coverage, not liability, so it comes from an inland marine form: a rented or leased equipment extension on your equipment floater, or a line added for the rental period. Check the limit for rented equipment against the value of the unit you are picking up, not the one you own. Our practical view: send us the rental agreement and the unit’s value as soon as you book, not when you collect.

The other route is the rental house’s own damage waiver. It is a contract with the rental company, not insurance, and one insurance agency warns that some waivers cover only limited damage or leave out the rental company’s lost income while the unit is out of service.[14] It also does nothing for your liability on site. Read what it excludes before you rely on it.

Leasing or financing new scanners and workstations

A lease or equipment loan usually puts the insurance on you. A typical lease provision requires the lessee to insure the equipment for its replacement cost and to name the lessor as loss payee.[15] Before the lender releases funds, tell us the make, model, serial number and value, and add the item to your schedule. A processing workstation that stays in the office usually sits under your business property limit rather than the floater, so check that limit when you add one. That last point is our practical view; it depends on how your policy is built.

Not covered by default

Calibration and breakdown

Contractors equipment floaters typically exclude mechanical breakdown and ordinary wear. Some electronic equipment forms can add breakdown coverage back.[7] We found no source showing that routine calibration or drift out of spec is insured, so treat calibration as a maintenance cost, and ask whether breakdown can be added to your policy.

Drones are aircraft

Contractors equipment forms commonly exclude aircraft unless an endorsement adds them back.[11] Some insurers now offer drones as an optional extension on a contractors equipment policy.[12] Otherwise, damage to the drone and its LiDAR payload belongs on an aviation hull policy. Liability for the drone is a separate question, covered in insurance for drone LiDAR and photogrammetry.

Before renewal

Eight questions to ask your broker

  1. What is the off-premises limit on our property or BOP policy, and does it apply to equipment in vehicles and at job sites?
  2. Is each scanner and total station scheduled at its replacement cost, and what is the blanket limit and per-item cap for everything else?
  3. What exactly is the condition for theft from a vehicle? Locked, forced entry, alarm, out of sight?
  4. Are we covered in transit, including when a courier has the case?
  5. What is the coverage territory, and how do we add a trip outside the U.S. and Canada?
  6. Are rented and borrowed scanners covered, up to what value, and for how long?
  7. Is mechanical or electrical breakdown covered, or can it be added?
  8. Is the drone excluded as an aircraft, and if so, where is it covered?

Keep a current list of every instrument, with serial numbers, purchase dates and photos. It speeds up a claim and keeps the schedule honest.

For your firm

Is your fleet scheduled correctly?

Send us your equipment list and current policy, and we will show you where a stolen or shipped scanner would fall through.

Common questions

Equipment coverage, in plain words

Our BOP covers business property. Is that enough for the scanners?

Often not for equipment in the field. Office and BOP forms usually give limited coverage for property away from your premises, sometimes a small fixed amount. An inland marine floater follows the equipment to the job. Check your form’s off-premises wording.

Should we schedule our scanners or use a blanket limit?

A common approach is to schedule the expensive items one by one at replacement cost and use a blanket limit, often with a per-item cap, for smaller gear. Keep the schedule current when you buy or sell.

Does equipment insurance cover our drone?

Often not. Contractors equipment forms commonly exclude aircraft unless an endorsement adds them back, and some insurers offer drones as an optional extension. Otherwise the drone needs aviation hull coverage.

We’re renting a bigger scanner and the rental house wants it covered for full value, with them named on the policy. What do we need?

Usually a rented or leased equipment extension on your equipment floater, or a line added for the rental period, with the rental company as loss payee. Check the limit against the value of the unit you are picking up, and send us the rental agreement as soon as you book. The rental house’s damage waiver is the other route; read what it excludes.

I’m buying another scanner and a workstation. Do I need to tell you?

Yes. Add the scanner to your schedule the week you buy it, with make, model, serial number and value, and tell us before a lender releases funds if it is leased or financed. A workstation that stays in the office usually sits under your business property limit, so check that limit too.

Is calibration or a scanner that drifts out of spec covered?

We found no insurer source that says it is. Wear and breakdown are commonly excluded, and calibration is normally a maintenance cost. Ask your insurer to answer it in writing for your policy.

Keep reading

Sources

  1. FLT Geosystems, Leica RTC360 Laser Scanner Kit listing (an equipment reseller)
  2. Adjusters International, “Business Personal Property of Others” (a public adjusting firm)
  3. Berkshire Hathaway GUARD, Products and Services guide (an insurer)
  4. Wexford Insurance, “Scheduled vs blanket equipment coverage” (an insurance agency)
  5. Wexford Insurance, “Contractor equipment theft insurance” (an insurance agency)
  6. Grit Insurance, “Tools stolen from work truck: what insurance covers” (an insurance agency)
  7. Open Exam Prep, “Commercial Inland Marine, Equipment Breakdown” and “Inland Marine and Nationwide Marine Definition” (insurance licensing study guides)
  8. PluginHive, “FedEx declared value liability cap” (a shipping software vendor)
  9. Cat Rental Store (Holt CAT), rental insurance requirements (an equipment dealer)
  10. Acuity, “Replacement cost vs. actual cost for equipment” (an insurer)
  11. Inland Marine Underwriters Association, “Introduction to Commercial Inland Marine: Contractors Equipment” (an industry association course)
  12. Insurance Journal, “AXA XL Expands Inland Marine Coverage with Contractor’s Equipment Offering” (2019, about an insurer)
  13. Leppo Rents, rental insurance requirements (an equipment rental company)
  14. Grit Insurance, “What type of insurance protects you when using rental equipment” (an insurance agency)
  15. Equipment Leasing and Finance Association, “Ten Essential Lease Provisions” (an industry association)

General information only, not legal advice, current as of November 2026. Equipment prices are from a reseller listing and change often. Whether a loss is covered depends on the policy wording and the facts; forms differ between insurers.

Talk to a specialist

Tell Us About Your Firm. We’ll Tell You What We See.

Starting out or renewing, with a policy in hand or not. If something is worth discussing, we’ll call. If not, we’ll say so.